Stump Grinder PRO XL
Maximum Power!
The easiest, fastest method of stump removal! The PRO XL Stump Grinder demolishes stumps up to 3 feet in width, including tough hardwoods, in minutes. With 8 Greenteeth® tungsten carbide-tipped teeth that last up to 3x longer than the competition and a world-class 11.7 HP (19.6 ft-lbs torque) DR OHV engine with electric start, this machine is ready to take out any stump.
Features:
• Simple Operation: Position the DR Stump Grinder over the stump, engage one of the wheel brakes to lock a single wheel in place before engaging the cutting head and pivoting over the stump from side to side, shaving off an inch or so of material with each pass. Reposition the machine as needed to continue removing material until the entire stump is reduced to a pile of wood chips.
• Easy transport: Lugged, high-flotation tires and DR’s lightweight design rolls over rough terrain for easy transport. Large size tires (15" x 4.75") gives the machine full support and help to keep the body of the machine elevated over wood chips during operation.
• Mining-grade teeth last 3x longer: The cutter head features 8, 3-sided Greenteeth® mining-grade tungsten carbide tipped steel teeth. 10 times harder than steel, tungsten carbide is often used for drilling through the toughest materials, including bedrock and each tooth can be rotated twice for added longevity.
• Powerful engine: Our DR OHV engine with electric start and 11.7 HP (19.6 ft-lbs gross torque) spins the cutting teeth at 2,800 rpm – taking 372 “bites” per second and powering through the toughest hardwood stumps up to 3 feet in diameter.
• Simple hand controls: Control the wheel brakes and engine throttle right from the handlebars. Lock one wheel in place to easily pivot the machine back and forth as you grind away any stump. Unlock and reposition as needed, right from your working position.
• Easy transport: Lugged, high-flotation tires and DR’s lightweight design rolls over rough terrain for easy transport. Large size tires (15" x 4.75") gives the machine full support and help to keep the body of the machine elevated over wood chips during operation.
• Mining-grade teeth last 3x longer: The cutter head features 8, 3-sided Greenteeth® mining-grade tungsten carbide tipped steel teeth. 10 times harder than steel, tungsten carbide is often used for drilling through the toughest materials, including bedrock and each tooth can be rotated twice for added longevity.
• Powerful engine: Our DR OHV engine with electric start and 11.7 HP (19.6 ft-lbs gross torque) spins the cutting teeth at 2,800 rpm – taking 372 “bites” per second and powering through the toughest hardwood stumps up to 3 feet in diameter.
• Simple hand controls: Control the wheel brakes and engine throttle right from the handlebars. Lock one wheel in place to easily pivot the machine back and forth as you grind away any stump. Unlock and reposition as needed, right from your working position.
